If an Advanced Accumulating Conveyor Curved has an elevation, the products don't rotated around the y-axis. On the AAC-Straight everything works fine. (Except from the wrong visualization of the supports.). I guess ACs_3DDraw can help with the right rotation:
Code: Select all
{**Make sure products are rotated correctly at conveyor**}
if(
Conveyors_Angle(atmC) <> 0,
do(
Repeat(
Content(atmC),
zTrans(rank(Count, atmC)) := -(zLoc(rank(Count, atmC))) + 0.001 + Label([TransZ], rank(Count, atmC))
),
RotateCoords(-(Conveyors_Angle(atmC)), 0, 1, 0) {!!!!!}
)
)
Or is there an other way to do this?
Thanks