Accumulating Conveyor
Accumulating Conveyor
Hallo ich habe eine kleine Frage zu Abständen im Accumulating Conveyor.
Meine Produkte die über eine Source auf den Conveyor gelangen bekommen mittels einer Bernoulli-Verteilung unterschiedliche Groesen zugeordnet wie kann ich es nun realisieren dass zwischen den Produkten immer ein bestimmter Abstand ist und die Produkte nicht aufeinander fahren?
Meine Produkte die über eine Source auf den Conveyor gelangen bekommen mittels einer Bernoulli-Verteilung unterschiedliche Groesen zugeordnet wie kann ich es nun realisieren dass zwischen den Produkten immer ein bestimmter Abstand ist und die Produkte nicht aufeinander fahren?
- MatthijsJongboer
- Posts: 200
- Joined: Thursday 11 November, 2010 - 14:12
Re: Accumulating Conveyor
Translation:Natascha wrote:Hallo ich habe eine kleine Frage zu Abständen im Accumulating Conveyor.
Meine Produkte die über eine Source auf den Conveyor gelangen bekommen mittels einer Bernoulli-Verteilung unterschiedliche Groesen zugeordnet wie kann ich es nun realisieren dass zwischen den Produkten immer ein bestimmter Abstand ist und die Produkte nicht aufeinander fahren?
Hello I have a small question about distances in the Accumulating Conveyor.
The products arriving from a source onto the conveyor get different sizes based upon a Bernoulli distribution. How can I realize that the distance between the products is always the same and the products do not collide?
Re: Accumulating Conveyor
Hello Natascha!
Try using the different spacing rules, which can be found at the bottom of the Specific tab.
In case you want products to be placed with equal distance between the products, use the Length + Spacing rule, and provide your distance between the products!
Good luck!
Kind regards,
Marvin
Try using the different spacing rules, which can be found at the bottom of the Specific tab.
In case you want products to be placed with equal distance between the products, use the Length + Spacing rule, and provide your distance between the products!
Good luck!
Kind regards,
Marvin
Re: Accumulating Conveyor
Thank you for the answer, no it works
An other question I have, is about the products in an accumulating Conveyour.
Can I analyze how much products are per hour in an accumulating conveyor, and which waiting time the products have?
An other question I have, is about the products in an accumulating Conveyour.
Can I analyze how much products are per hour in an accumulating conveyor, and which waiting time the products have?
Re: Accumulating Conveyor
Hello Natascha!
For analyzing the number of products and lead times, please have a look at write different Times to Excel. You can write your data to Excel and determine the number of products per hour and lead times within Excel.
Another option is to attach a Monitor atom to the conveyor. Drag and drop the Generic Monitor (under RESULTS in the library tree) into the model and provide the setting you would like to monitor (for example Graph type = "Linegraph" and Variable to monitor = "Average Stay" or "Output per hour"). Connect the input channel of the Monitor to the central channal of the conveyor, and start the simulation to view the results.
Good luck!
Marvin
For analyzing the number of products and lead times, please have a look at write different Times to Excel. You can write your data to Excel and determine the number of products per hour and lead times within Excel.
Another option is to attach a Monitor atom to the conveyor. Drag and drop the Generic Monitor (under RESULTS in the library tree) into the model and provide the setting you would like to monitor (for example Graph type = "Linegraph" and Variable to monitor = "Average Stay" or "Output per hour"). Connect the input channel of the Monitor to the central channal of the conveyor, and start the simulation to view the results.
Good luck!
Marvin
-
- Posts: 1
- Joined: Wednesday 17 December, 2014 - 10:41
Re: Accumulating Conveyor
Hello there Natascha!
Use the various spacing regulations, that you can get in the bottom with the Particular tab.
In the event you need items to become inserted along with identical distance relating to the items, utilize Length + Spacing tip, and gives the distance relating to the items!
All the best .!Kind regards,
Use the various spacing regulations, that you can get in the bottom with the Particular tab.
In the event you need items to become inserted along with identical distance relating to the items, utilize Length + Spacing tip, and gives the distance relating to the items!
All the best .!Kind regards,
Get fast success in C4040-123 - latest dumps and 642-467 - pass4sure - braindumps.com exam questions by using our hawaii and www.usuhs.mil