Page 1 of 1

Link Advanced Transporter and network

Posted: Thursday 03 January, 2019 - 14:49
by jastesem
Hi everyone!

We are working on a school project where we have to model the path that an advanced transporter has to follow. We don't know how we can connect the transporter to the network. We tried adding a network controller and optimize the network, but we still can't connect it and we really don't know what our problem is.

Our project can be found below. Can somebody help us? Thanks a lot!!

Re: Link Advanced Transporter and network

Posted: Thursday 03 January, 2019 - 14:58
by HarryBunnik
Hi Jastesem,

If you open the user interface of the Advanced Transporter by double-clicking on it, you see that there is on the first tab (General) under miscellaneous a button "Link to network". If you press this, an overview is given of all atoms within your model. Here you can select the node to which you want to connect the Advance transporter (this will become the starting point or parking place for this transporter).

Success with your project!

Harry

Re: Link Advanced Transporter and network

Posted: Thursday 03 January, 2019 - 15:04
by jastesem
HarryBunnik wrote: Thursday 03 January, 2019 - 14:58 Hi Jastesem,

If you open the user interface of the Advanced Transporter by double-clicking on it, you see that there is on the first tab (General) under miscellaneous a button "Link to network". If you press this, an overview is given of all atoms within your model. Here you can select the node to which you want to connect the Advance transporter (this will become the starting point or parking place for this transporter).

Success with your project!

Harry
Hi Harry,

Thanks for the quick response! When we do that, the advanced transporter will follow the path once, but the second time it doesn't follow the path anymore. Any idea why? Thanks a lot!

Re: Link Advanced Transporter and network

Posted: Thursday 03 January, 2019 - 15:10
by HarryBunnik
Hi Jastesem,

That normally means that the position where something needs to be dropped off is not connected with the network. So I would look in that direction.

Cheers,

Harry