InControl Community

Hi,

first problems are solved. I use 4 Advanced robots to weld.

The problem is, there is no material flow. So how to tell the robot to start the Routine? (Routine is already defined.)

with best regards

HI and thx,

but the problem is a bit different:

first 20 - to channel 1
second 20 - to channel 2
third 20 - to channel 1


and so on....

so i had to define for each 20 the routing... isn't there any routine for this?

Hi I need to route 20 Products to Output-channel 1, next 20 to Outputchannel 2 and so on...how to do this?


thx a lot

Hi, I got a problem. I need an idea how to model the following: I modeled all the processes where the parts for a welding construction are put into a welding device. Now i need to simulate how 4 Robots weld at the same construction. There are about 20 weldseams to do. For this the robots weld, then ...

Hi I also got a problem like this

Advanced transporter works so far. I can adjust the time from picking part one to picking part two by setting the speed of the transporter.
But I need to define a time between picking product 1 and picking product 2. Is there any way?


best regards and thx a lot.

Hi Marvin. Thx again...it works. But i got a new Problem ;) I need an robot, which is able to collect more than one Product at the same time. For example: - Robot moves to queue1 takes part 1 - Robot moves to queue2 takes part 2 (part 1 is still in robots hand) - robot moves to queue3 takes part 3 (...

HI Marvin, thx a lot. It works. But I got another problem. Maybe you or anybody else can help me. For this assembler I got 3 Sources. Source 1, Time till first 0, inter arrival no1 is 6, no2 is 18, no3 is 6 and so on.... Source 2, Time till first product 0, inter arrival 18 Source 3, Time till first...

Hi, i got the following problem: Assembler with 3 inputs and 2 possibilities to assemble. First is 1 of a, 1 of b, 0 of c Second is 1of a, 0 of b, 1 of c The bom Table is right but i need to tell the assembler whether to assemble with Column 1 or 2. The Decision is easy, cause every 1., 3., 5., ... ...