Search found 22 matches

by Ken8891
Saturday 08 July, 2017 - 03:37
Forum: Modeling in Pedestrian Dynamics
Topic: Chances of 2 agents going to the same stand.
Replies: 12
Views: 34447

Re: Chances of 2 agents going to the same stand.

Hi Charles, I had also noticed that the seats is not fully occupied by the agents. Example the capacity of my stand is 30000. And the NR of agents generate by generator is taken from the user tables which is 500. So in this case, the generator will constantly pumping out 500 of agents from each entr...
by Ken8891
Saturday 08 July, 2017 - 02:39
Forum: Modeling in Pedestrian Dynamics
Topic: Chances of 2 agents going to the same stand.
Replies: 12
Views: 34447

Re: Chances of 2 agents going to the same stand.

Hi Charles,

It does distribute evenly when going to the stands, but it does not distribute evenly when going up the stairs. As you can see from the picture, the agents went to the stand from only 1 stairway, but I got another 1 stairway available, but no agents is using it.

Best regards
Kenneth
by Ken8891
Friday 07 July, 2017 - 07:31
Forum: Modeling in Pedestrian Dynamics
Topic: Chances of 2 agents going to the same stand.
Replies: 12
Views: 34447

Re: Chances of 2 agents going to the same stand.

Hi when I disable my stand layer. I found out this.
by Ken8891
Friday 07 July, 2017 - 06:56
Forum: Modeling in Pedestrian Dynamics
Topic: Chances of 2 agents going to the same stand.
Replies: 12
Views: 34447

Re: Chances of 2 agents going to the same stand.

Hi Marlies, Thanks for the demo and the reply. I had tried using the determine final destination. But the crowd still seems to be entering from the most right stairs and heading over to 1 part of the standsection rather than distributing evenly. Is there any solutions to make the agents to use both ...
by Ken8891
Thursday 06 July, 2017 - 11:11
Forum: Modeling in Pedestrian Dynamics
Topic: Chances of 2 agents going to the same stand.
Replies: 12
Views: 34447

Re: Chances of 2 agents going to the same stand.

Hi,

I just tried to implement something like yours. I followed. But the crowds just went to 1 stand instead of distribute uniformly between the 2 stands.

And the crowd only use 1 stairs instead of the other.

How should I solve this 2 issue?
by Ken8891
Thursday 06 July, 2017 - 10:20
Forum: Modeling in Pedestrian Dynamics
Topic: Chances of 2 agents going to the same stand.
Replies: 12
Views: 34447

Re: Chances of 2 agents going to the same stand.

Hi, What about if i got a center stand. And both east and west entry needs to go to the center stand? The part of determining the number of agents based on the table and not the stands capacity is quite a important factor. I believe this will more or less solve my issue. Need this demo asap. Thanks ...
by Ken8891
Thursday 06 July, 2017 - 08:35
Forum: Modeling in Pedestrian Dynamics
Topic: Chances of 2 agents going to the same stand.
Replies: 12
Views: 34447

Re: Chances of 2 agents going to the same stand.

Hi, My Nr Agents is GetCrowdSizeInputData(1,1). My objective is to have 5 entrys entering and goes to the 5 stand section. 2 entrys from the west and 3 entrys from the east. The 2 entrys will goes to standsection 1 to 3. And the 3 entrys from the east will goes to standsection 3 to 5. The NR Agents ...
by Ken8891
Wednesday 05 July, 2017 - 07:09
Forum: Modeling in Pedestrian Dynamics
Topic: Chances of 2 agents going to the same stand.
Replies: 12
Views: 34447

Chances of 2 agents going to the same stand.

Hi,

Could there be a chance for 2 different agent entering from 2 different entry going into the same stand?

Let's say I have 5 standsections.
1. Entry1 to standsection3
2. Entry2 to standsection3

Best Regards
Kenneth
by Ken8891
Tuesday 04 July, 2017 - 11:18
Forum: Modeling in Pedestrian Dynamics
Topic: Change of ECM path when stop then play
Replies: 1
Views: 12981

Change of ECM path when stop then play

Hi, Just a quick question, when the simulation starts running, the passageway is set to unavailable. Can the simulation be stop and change the passageway to bidirectional and start running without reset? Will the ECM path change to the change passageway? The changing of passageway to bidirectional i...
by Ken8891
Tuesday 04 July, 2017 - 10:34
Forum: Modeling in Pedestrian Dynamics
Topic: No route found and Invalid goal location
Replies: 11
Views: 53253

Re: No route found and Invalid goal location

Hi,

It seems to solve the no route found and invalid goal location. But now I have this invalid start location. I have trace the start location to be one of the entry. What could be the possible reason for the agent to be at the entry instead of moving to the destination?